The surface stress tester FSM-6000LE ORIHARA, formerly made by Toshiba Glass Research Institute in Japan, was purchased, improved and manufactured by ORIHARA in Japan. It is a surface stress tester for tempered glass. The automatic measurement error of the tempered glass stress meter FSM-6000LE is small. It is widely used in chemical flat glass manufacturers and touch panel manufacturers, such as LCD screen manufacturers. Tempered glass stress meter, FSM-6000LE glass surface stress meter is used to measure the surface stress of chemically strengthened and physically strengthened glass. The stress on the surface and the depth of the stress layer can be measured according to the photoelastic technology by allowing light to propagate along the glass surface. This machine is equipped with a computer, which can reduce the error of the measurer and facilitate the management of measurement data. The FSM-6000 glass surface stress meter is easy to use and operate. It not only shortens the time required for the measurement process, but also monitors the glass production process in a timely manner. The machine can analyze the surface stress of chemically tempered glass well, and then judge the tempering degree of the product.
According to the relevant provisions of the Chinese building materials industry standard JC-T 977-2005 chemical tempered glass, the product quality grade can be well compared, so the FSM-6000 glass surface stress meter is an indispensable measuring tool for the production industry of chemical tempered glass, and this technology is also an irreplaceable authority.
[Instrument characteristics]
- 1. It has the only measurement method (refractometer photoelastic analysis principle) not available in other models.
- 2. Automatic measurement, small personal error caused by testers.
- 3. Be able to save data with computer for quality management.
- 4. The test portion with poor test conditions can be measured manually.
- 5. LED light source is used, with a long service life of 10000 hours (500 hours before).
- 6. Glass calibration sheet is used so that the machine error can be minimized.