Product center

Product display

Current location:

homepage > Product display > Optical measuring instrument Image measuring instrument

Micro transmissivity measuring instrument TMS -Pro

It can quickly and accurately measure the phase/absolute transmissivity and Mann transmissivity of optical elements such as various planes, spheres and ramps, and can be used to real-time display the single and multi-point wavelength transmissivity data and the average transmissivity data of specified wavebands, and real-time display the semi transmissivity wavelength and slope. It is applicable to the transmittance measurement of IR holes, white ink (semi transparent and uniform white), curved edge IR holes (2.5D, 3D), coated mirrors, glued mirrors, parallel plates, solar films, filter optical elements, etc.

Micro transmissivity measuring instrument TMS -Pro

Purpose:
It can quickly and accurately measure the phase/absolute transmissivity and Mann transmissivity of optical elements such as various planes, spheres and ramps, and can be used to real-time display the single and multi-point wavelength transmissivity data and the average transmissivity data of specified wavebands, and real-time display the semi transmissivity wavelength and slope. It is applicable to the transmittance measurement of IR holes, white ink (semi transparent and uniform white), curved edge IR holes (2.5D, 3D), coated mirrors, glued mirrors, parallel plates, solar films, filter optical elements, etc.

characteristic:
1. Full angle acquisition and full penetration measurement (integrating sphere)
2. Micro coaxial confocal technology is used for video hole alignment to make fixed-point measurement more intuitive and accurate
3. Real time display of transmittance data and semi transmittance wavelength monitoring at the wavelength of interest of the measured sample, automatic adjustment of display coordinate range, and efficient batch sample detection and spectrogram comparison and analysis.
4. Detection time in milliseconds: high performance detector, which can measure with high reproducibility within 0.3 seconds;
5. You can define the measurement scheme by yourself, and set the criteria to make the detection faster and the results more accurate.

Technical specifications:
Measuring system: single beam
Measurement mode: full angle acquisition full penetration measurement (integrating sphere)
Detector: Hamamatsu (thin back illuminated FFT-CCD, imported from the United States)
Detection limit: 0.05%
Photometric accuracy:<0.5% (400-1000nm) compared with standard sample
Photometric repeatability:<0.3%
Wavelength detection range: 380-1100nm
Signal to noise ratio (full signal): 450:1
Wavelength repetition rate: 0.1nm
Sample test platform: X and Y axes are adjustable
Light source: high-power halogen light source
Spot diameter: ＜ 0.3mm (expandable to 0.1mm, continuously adjustable)
Sample size: ≥ 0.5mm
Single measurement time:<0.3s
Focusing mode: digital camera video focusing
Objective lens: 10X
Software: QSpec Suite V1.0, can display single and multi-point wavelength data, can simultaneously measure multiple holes for comprehensive judgment, can manually and automatically save data, automatically count the total number of product batch numbers, the number and percentage of good products and defective products measured, and export them in the form of a report with one key. Out of tolerance alarm prompt, and machine error can be calibrated according to user standards; Lifetime free upgrade
Operating system/interface: Win7, Win10/USB2.0

Product recommendation

CS tester FSM-6000LE glass surface stress meter
Learn more>>

CS tester FSM-6000LE glass surface stress meter

CS tester FSM-6000LE glass surface stress meter, with small automatic measurement error, is widely used in chemical flat glass manufacturers such as LCD and touch panel manufacturers. Tempered glass stress meter, FSM-6000LE glass surface stress meter is used to measure chemically strengthened and physically strengthened glass
Learn more>>
SSM-II glass surface stress meter
Learn more>>

SSM-II glass surface stress meter

SSM-II glass surface stress meter uses the optical waveguide effect caused by the tin diffusion layer on the surface of float glass to measure the surface stress quantitatively.
Learn more>>
Surface stress tester FSM-6000LE
Learn more>>

Surface stress tester FSM-6000LE

It is mainly used to measure the surface stress of chemically strengthened and physically strengthened glass
Learn more>>
Polarization stress meter LSM-4403
Learn more>>

Polarization stress meter LSM-4403

The automatic measurement error of the tempered glass stress meter FSM-6000LE is small. It is widely used in chemical flat glass manufacturers and touch panel manufacturers, such as LCD screen manufacturers. Tempered glass stress meter, FSM-6000LE glass surface stress meter is used to measure the surface stress of chemically strengthened and physically strengthened glass.
Learn more>>