Dongyi Precision Equipment

Provide professional laboratory solutions and equipment support

24-hour service hotline for technical consultation

400-992-8117

Xiao Sheng thirteen billion three hundred and sixteen million eight hundred and eighty-five thousand one hundred and seventeen

Technical Support

technical support

Current location:

Use of surface stress meter and precautions

  • Source: Unknown
  • Date: February 27, 2020
  • Number of views: two hundred and sixty-nine
By using the surface Stress meter Check the stress of the periphery of the assembled and processed glasses in the lens ring. It is required that the stress of the periphery of the lens in the lens ring is basically uniform. Generally, we can observe the following four situations:
 
1. Uniform stress - the periphery of the lens is semicircular and uniform
 
2. Stress is too strong - the periphery of the lens is in a linear shape with long sharp angles
 
3. Local stress is too strong - there are sharp angles and long lines around the lens
 
4. Too weak stress - there is almost no line image around the lens
        
 
Inspection and analysis There are two cases that can not meet the requirements through surface stress meter inspection. One is that the stress is too strong or the local stress is too strong, and the other is that the stress is too weak. The main causes of excessive stress and local excessive stress are:
 
① The lens is too worn.
 
② The shape of the lens is inconsistent with the geometric shape of the mirror ring, including the shape, position and overall shape of its edges or angles.
 
③ The curvature of lens is inconsistent with that of lens ring.
 
④ Lens edge color is not on the same line.
 
The main reason for the weak stress is that the main reason for the whole lens is small.
 
Therefore, during assembly and processing, it can be corrected again according to the stress inspection conditions and causes, otherwise it will cause lens edge collapse, damage or lens falling off during wearing.
 
usage method
1. Tool: stress gauge.
 
2. Operation steps
 
(1) Turn on the power supply, turn on the switch, and the light will be on.
 
(2) Place the tested glasses between the polarizer and polarizer of the instrument.
 
(3) The inspector can observe the stress around the lens in the lens ring from the up direction of the polarizer.
 
(4) According to the observed stress, judge whether the stress around the lens is uniform or needs to be corrected.
 
The above is the use and precautions of surface stress gauge shared by Shenzhen Dongyi Precision Equipment Co., Ltd
 
 

Professional agent of well-known instruments and equipment at home and abroad

Provide professional laboratory solutions and equipment support

  • Strong technical R&D team
  • Experienced and excellent technology and innovative ideas
  • High quality product supporting star service

Hotline:

thirteen billion three hundred and sixteen million eight hundred and eighty-five thousand one hundred and seventeen

Leave us a message , please fill in the correct information so that we can contact you at the first time!

Related recommendations: