Product center

Product display

Current location:

homepage > Product display > Material testing machine Tensile testing machine

Automatic crimping tester MAX-50KN

Automatic crimping tester MAX-50KN

model:

MAX-50KN	Brand: Japan ALGOL Aigu	Input voltage: 3 (V)
Weight: - (kg) (g)	Color rendering index: 0	Color temperature: 0 (K)
Temperature range: - (℃)	Luminous flux: 0 (LM)	Working chamber size: - (mm)

yle="clear:both;">

■ MAX series intelligent testing machine can store important parameters and sequences in the test operation, which is convenient for the same test next time, and you do not have to do repeated system settings.
■ MAX series testers all have a built-in floppy disk drive. When it is used in the production line, it can replace a computer to record data. The floppy disk can record the test data and results, and can be easily taken out to provide more research data accurately.
■ The MAX testing machine is equipped with a high-density LCD display, from which you can visually see the change of the test load displacement curve.
■ The standard 110mm thermal paper printer can print all test data and test curves, and the other printing serial port can output test results to external printing equipment and print them in table format.
■ MAX standard software components can perform many conventional pressure and tension testing tasks. His SPC data statistics function will carry out real-time statistics from the measured results, and can compare and screen the test results by setting upper and lower tolerances.
■ Accurate movement of 1mm, 0.1mm, 0.01mm (0.001 mm) can be achieved by simple operation.
■ During the load test, because the interaction of forces will cause small deformation of materials, the testing machine can automatically correct through the automatic origin. This is very important in high-precision load displacement testing.
■ The MAX series testing machine can install the operating program through the floppy drive, which can easily complete the test task by changing the program. Through other program commands, MAX tester can complete more diverse tasks.
■ The maximum load, peak value, breaking value, valley value, load coefficient, return test and other tests can all be found in the MAX series testing machine.
Fixed sensor models: 10N/100N/500N three models
Switched inductor models: 1kN/5kN/20kN/50kN 4 models
Length display and resolution:
Basic type: 0.01 ± 0.02mm
Standard type: 0.001 ± 0.02mm
High precision type: 0.001 ± 0.01mm

Product recommendation

CS tester FSM-6000LE glass surface stress meter
Learn more>>

CS tester FSM-6000LE glass surface stress meter

CS tester FSM-6000LE glass surface stress meter, with small automatic measurement error, is widely used in chemical flat glass manufacturers such as LCD and touch panel manufacturers. Tempered glass stress meter, FSM-6000LE glass surface stress meter is used to measure chemically strengthened and physically strengthened glass
Learn more>>
SSM-II glass surface stress meter
Learn more>>

SSM-II glass surface stress meter

SSM-II glass surface stress meter uses the optical waveguide effect caused by the tin diffusion layer on the surface of float glass to measure the surface stress quantitatively.
Learn more>>
Surface stress tester FSM-6000LE
Learn more>>

Surface stress tester FSM-6000LE

It is mainly used to measure the surface stress of chemically strengthened and physically strengthened glass
Learn more>>
Polarization stress meter LSM-4403
Learn more>>

Polarization stress meter LSM-4403

The automatic measurement error of the tempered glass stress meter FSM-6000LE is small. It is widely used in chemical flat glass manufacturers and touch panel manufacturers, such as LCD screen manufacturers. Tempered glass stress meter, FSM-6000LE glass surface stress meter is used to measure the surface stress of chemically strengthened and physically strengthened glass.
Learn more>>