Product center

Product display

Current location:

homepage > Product display > Material testing machine Tensile testing machine

Full automatic torsion spring tester PRO-T

Model: PRO-T
Type: spring torsion testing machine
Measurement range: 0.5 (N.m)
Display resolution: 1/10000 (°)
Travel: 0-7200 revolutions (mm)
Test piece size: 88 (mm)
Boundary dimension: 500X400X300 (mm)
Scope of application: Torsion spring testing GP-PRO-TS full-automatic torsion spring testing machine is a material testing machine, Yle="color: # 0000cd;">Tensile testing machine One of.

1. Functions: The torsion spring testing machine PRO-T series is a high-performance testing machine that automatically measures the angle ←→ load, load ←→ torque of the torsion spring, and can play an efficient and labor-saving torsion spring inspection function.
2. Features: easy to operate, and can set any measurement conditions. According to the input of the drawing size of the spring, the positions of the X axis and Y axis load bars and rotary bars can be calculated. The test results and set values can be seen clearly on the screen. The range of load measurement can be automatically switched. The torque value and load value are switched. There are three units gf, kgf and N (Newton) to choose from. There are also three kinds of units for the length of torque: mm, cm and m. The test speed can be set. Any torque, load and angle can be reset to zero. It can make inching rotation of 10 degrees, 1 degree and 0.1 degree each time. It has the function of automatic origin detection. The internal key has overload stop and emergency stop devices. The index number, measured angle, torque value, load value, elastic coefficient and free angle can be listed and printed. The average value of the data obtained from the previous test and the response test can be listed. The printing mode can select the load value, torque value and two units and record them for printing. The calculation and representation of the most suitable guide rod can be performed. The selection of center angle and outer circumference angle and the expression of angle can be executed. The operation panel can indicate the indicated value of the electronic caliper of the X-Y mobile station in writing.

Product recommendation

CS tester FSM-6000LE glass surface stress meter
Learn more>>

CS tester FSM-6000LE glass surface stress meter

CS tester FSM-6000LE glass surface stress meter, with small automatic measurement error, is widely used in chemical flat glass manufacturers such as LCD and touch panel manufacturers. Tempered glass stress meter, FSM-6000LE glass surface stress meter is used to measure chemically strengthened and physically strengthened glass
Learn more>>
SSM-II glass surface stress meter
Learn more>>

SSM-II glass surface stress meter

SSM-II glass surface stress meter uses the optical waveguide effect caused by the tin diffusion layer on the surface of float glass to measure the surface stress quantitatively.
Learn more>>
Surface stress tester FSM-6000LE
Learn more>>

Surface stress tester FSM-6000LE

It is mainly used to measure the surface stress of chemically strengthened and physically strengthened glass
Learn more>>
Polarization stress meter LSM-4403
Learn more>>

Polarization stress meter LSM-4403

The automatic measurement error of the tempered glass stress meter FSM-6000LE is small. It is widely used in chemical flat glass manufacturers and touch panel manufacturers, such as LCD screen manufacturers. Tempered glass stress meter, FSM-6000LE glass surface stress meter is used to measure the surface stress of chemically strengthened and physically strengthened glass.
Learn more>>